Enabling/Disabling Broadcast - VeriFone MX 760 Configuration Manual

Enabling/Disabling Broadcast

Use this configuration function to enable configuration downloads from the Ruby to all DCRs at once.
When disabled, the configuration is downloaded to each DCR individually.
1. On the CONFIG screen, press the right scroll key until BROADCAST is displayed and press
[ENTER].
2. If broadcast is currently disabled, the following screen is displayed. Do one of the following:
– Press the menu key next to YES to enable broadcast and enable configuration downloads
from the Ruby to all DCRs at once.
– Press the menu key next to NO or Quit to keep broadcast disabled.
Note: If broadcast is currently enabled, a screen displays saying it is enabled and giving you
the option to disable it.
November 10, 2011
CONFIG
<-- ACCEPT
Broadcast Disabled
Enable Broadcast?
< YES
Secure PumpPAY Retrofit Kit Configuration Guide
BROADCAST
-->
NO >
Quit >
23