ENHANCED VISION Transformer HD User Manual page 17

4. Regardless of which display combination you are using the Transformer must be turned ON
in order to use it. A message will display saying "Connecting Transformer" you should then
press the Power Button once and only once. A Transformer HD Logo should appear.
Afterwards an image should appear on your Display and you will enter into "Live CCTV View".
The device indicates its connections status via on-board LED's. The table describing these
states in detail is located in the following section. Please be patient as the unit starts up and
establishes connection.
Wi-Fi Configuration Steps:
If you intend to utilize your Transformer HD via Wi-Fi use
these steps to pair your Computer or Tablet to the
Transformer so you can use it wirelessly.
 Step #1: Enter into your Computer Network Settings
Tablet Wi-Fi Settings (Make sure your Wi-Fi Adapter is
turned ON)
 Step #2: Scan for nearby Wi-Fi networks and identify
the Transformer HD by its Serial Number which should
be clearly labeled on your Transformer HD.
 Step #3: Choose to connect to this device
 Step #4: You should receive a prompt for a network password which is set by default to
be "EV_TransformerHD"

Your Wi-Fi Password and SSID can be changed in the settings menu on the PC Viewer
applicationStep #5: If you have multiple networks configured always check your
Network list to ensure that your Transformer HD is selected prior to use.
Pressing Power should display the Transformer HD Connecting
System Message and splash screen should display.
17