Installation Rules - SAMES KREMLIN PPH 308 User Manual

system must be verified once a week.
A warning sign must be placed in full view near the spraying area.
Excessive turbine speed can result in serious damage to the turbine and loss of connection
between the bell cup and turbine, presenting a risk to persons and equipment. Do not exceed
the maximum operating speed

1.4.1. Installation rules

• To use an UHT 188, it must be connected to a GNM 200 whose firmware is version V 5.63 or
later.
• If UHT 188 is used to supply a single atomizer, the HV cable must be no longer than 9m.
• If UHT 188 is used to supply two atomizers, the sum of the HV cable lengths must be no
more than 8.5m.
e.g. If both atomizers are at the same distance from HVU 188, the allowable length of
each HV cable is no more than 4.25 m (8.5/2 = 4.25 m).
If two atomizers are used, please note that as a part to be painted is brought close to one
atomizer, the voltage to the second atomizer will simultaneously drop.
WARNING : The installation of any system that does not comply with the rules specified above
and below is strictly prohibited.
Index revision : C - November 2017
(see § 3 page 20).
10 7030