Operating Characteristics - SAMES KREMLIN PPH 308 User Manual

3.2. Operating characteristics

Weight
PPH 308 without hoses or cables
Current
Maximum operating voltage
Maximum operating current
Speed
Recommended rotation speed
Paint
Paint flow rate
Normal supply pressure
Maximum pressure
Viscosity
Viscosity
Paint resistivity
Air pressure
Microvalve pilot
Bearing air
Microphone air
Shaping air
Compressed Air quality
Filtered (bearing air), dry, oil and dust-free according to standard NF ISO 8573-1
Maximum dew point at 6 bar (87psi)
Maximum oil concentration
Maximum particle size of solid con-
taminants
Maximum concentration of solid con-
taminants
Air consumption
Pilot
Bearing air
Shaping air
Turbine
* Resistivity values measured with Resistivohmeter AP 1000 (SAMES P/N: 910005790). For lower
values, contact SAMES KREMLIN.
For values greater than 6 MΩ.cm, you are advised to use the PPH 308 with integrated high
voltage unit.
3
** m values given for a temperature of 20 °C at 1013 mbar atmospheric pressure.
0
Index revision : C - November 2017
2.5 kg
100 kV
200 μA
10,000 to 45,000 rpm
30 to 500 cc/min max. (depending on
paint)
6 to 8 bar
10 bar max.
12 to 40 seconds - FORD cup # 4
12 to 45 seconds - AFNOR cup # 4
ρ ≥ 0,5 MΩ.cm *
6 to 10 bar max.
6 to 7 bar max.
1.9 to 3 bar constant
6 bar maximum
Class 4, i.e + 3° C (37° F)
Class 4, i.e 2 mg / m
Class 3, i.e 5 μm
3 **
5 mg /m
0
10 Nl/min
125 Nl/min
0 to 600 Nl/min according to the shap-
ing air assembly used
see RT Nr 6350
21
3 **
0
7030