SAMES KREMLIN PPH 308 User Manual page 8

WARNING :
This device must only be used in spraying areas that comply with European standards EN 50176,
EN 50177, EN 50223 or equivalent ventilation conditions. Equipment must be used only in well-
ventilated areas, in order to reduce health, fire and explosion hazards. The efficiency of the
ventilation system must be verified on a daily basis.
In potentially explosive atmospheres generated by the spraying process, only the appropriate
electrical equipment, protected against explosions, should be used.
Before cleaning or working on atomizers in the spraying area, the high voltage generator must
be switched off and the HV circuit (atomizer) discharged to the ground.
.
Never point the pressurized product or the compressed air towards persons or animals.
Suitable measures must be taken to ensure there is no potential energy (liquid, air pressure or
electricity) in the equipment during downtimes and/or periods when the equipment is not
being used.
The use of personal protective equipment can limit the risks caused by contact with and/or
inhalation of toxic products, gases, vapours, mist and dust likely to be generated by the
equipment in use. The operator must follow the manufacturer's instructions for the coating
product.
The electrostatic spraying device must be regularly serviced in accordance with the indications
and instructions given by SAMES KREMLIN.
The equipment must be cleaned either in authorized areas equipped with a mechanical
ventilation system, or using cleaning fluids with a flash point at least 5°C higher than the ambient
temperature.
Cleaning fluids must be held in metal containers that are securely grounded.
No naked flames, incandescent objects, devices or items likely to produce sparks inside the
paint booth.
No storage of inflammable products or their containers close to the booth or near the doors.
The surrounding area must be kept clear and clean.
Index revision : C - November 2017 8 7030