Changing The System Pin - Gigaset E370 User Manual

Gigaset E370 / LUG IM-Ost en / A31008-M2815-R601-1-TK19 / settings_BS.fm / 9/18/17
System

Changing the system PIN

Secure the telephone's system settings with a system PIN. You have to enter the system PIN
when you register or de-register a handset, change local network settings, perform a firmware
update or reset the phone to default settings.
Change the telephone's 4-digit system PIN (default setting: 0000):
¤
OK
new system PIN
Resetting system PIN
Resetting the base station to the original PIN 0000:
¤
Unplug the network cable from the base station
key on the base station
station
PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.
Restoring the phone to default settings
When the settings are reset
•
the date and time are retained,
•
handsets are still registered,
•
the system PIN is retained,
•
Maximum Range is activated and No Radiation is deactivated.
¤
OK . . . use
takes around 10 seconds.
52
. . . use to select
. . . use to enter the current PIN (if other than 0000)
Save
At the same time reconnect the network cable to the base
Press and hold the key for at least 5 secs . . . the base station is reset and the system
. . . use to select
to enter system PIN
Settings OK System
Press and hold the Registration/Paging
Settings OK System
OK Yes . . . the base station is restarted. The restart
OK System PIN
OK . . . use to enter
OK Base Reset