Table of Contents
Advertisement
www.ti.com
5
DAC8742HEVM Software Overview
This section discusses how to use the DAC8742HEVM software.
5.1
Starting the DAC8742HEVM Software
Once the DAC8742H EVM software is installed, the PC may have to be restarted. To launch the software,
locate the Texas Instruments folder in the All Programs menu and select the DAC8742H EVM icon.
This section describes the features of the DAC8742H EVM software. The software, as shown in
provides basic control of all the registers and functions to the DAC8742H device. If the USB2ANY is
correctly connected, the STATUS displays "HARDWARE CONNECTED". If the USB2ANY is not properly
connected or not connected at all, the STATUS displays "DEMO". If the GUI is not displaying the
"CONNECTED" status while the USB2ANY is connected, unplug and reconnect the USB2ANY and re-
launch the GUI software.
SLAU700A – June 2017 – Revised November 2017
Submit Documentation Feedback
Figure 4. DAC8742HEVM GUI Location
Figure 5. DAC8742HEVM GUI – Power On
Copyright © 2017, Texas Instruments Incorporated
DAC8742HEVM Software Overview
Figure
DAC8742H Evaluation Module
4,
11
Advertisement
Table of Contents
