Introduction; Purpose Of The Manual; Additional Resources; Product Overview - Danfoss VLT PROFIBUS DP MCA 101 Installation Manual

Introduction

1 1
1 Introduction

1.1 Purpose of the Manual

This installation guide provides information for quick instal-
lation of a VLT
frequency converter.
The installation guide is intended for use by qualified
personnel. Users are assumed to know the VLT
converter, with PROFIBUS technology, and with the PC or
PLC used as a master in the system.
Read the instructions before installation and ensure that
instructions for safe installation are observed.
®
VLT is a registered trademark.

1.2 Additional Resources

Resources available for the frequency converters and
optional equipment:
•
The VLT
necessary information for getting the frequency
converter up and running.
•
The VLT
information about capabilities and functionality
to design motor control systems.
•
The VLT
detail on working with parameters and many
application examples.
•
The VLT
provides information about installing the
PROFIBUS and troubleshooting.
•
The VLT
Guide provides information about configuring the
system, controlling the frequency converter,
parameter access, programming, troubleshooting,
and some typical application examples.
Supplementary publications and manuals are available
from Danfoss. See vlt-drives.danfoss.com/Support/Technical-
Documentation/ for listings.

1.3 Product Overview

1.3.1 Intended Use
This installation guide relates to PROFIBUS interface
ordering numbers 130B1100 and 130B1200.
The PROFIBUS interface enables communication between a
®
VLT frequency converter and any master complying with
the PROFIBUS standard. Communication can be configured
via MCT 10 Set-up Software. The PROFIBUS interface
supports PROFIBUS DP-V1.
2
®
PROFIBUS DP MCA 101 in the VLT
®
Operating Instructions provide the
®
Design Guide provides detailed
®
Programming Guide provides greater
®
PROFIBUS DP MCA 101 Installation Guide
®
PROFIBUS DP MCA 101 Programming
Danfoss A/S © 07/2015 All rights reserved.
®
VLT PROFIBUS DP MCA 101
®
VLT PROFIBUS DP MCA 101 is intended for use with:
•
•
®
•
•
®
frequency
•
•
Requirements to the master:
A PLC or PC that:
•
•
•
•
•
1.3.2 Items Supplied
When the fieldbus option is not factory-mounted, the
following items are supplied:
•
•
•
•
•
•

1.4 Approvals and Certifications

More approvals and certifications are available. For more
information, contact a local Danfoss partner.
®
VLT HVAC Drive FC 102.
®
VLT Refrigeration Drive FC 103.
®
VLT AQUA Drive FC 202.
®
VLT AutomationDrive FC 301/FC 302.
®
VLT DriveMotor FCP 106.
®
VLT DriveMotor FCM 106.
Has a serial communication card with PROFIBUS
master class 1 capability.
Supports all PROFIBUS communication services
required by the application.
Fulfils requirements of the PROFIBUS standard.
Fulfils requirements of the PROFIBUS frequency
converter profile and its company-specific
implementation, PROFIdrive.
Fulfils requirements of the relevant VLT
frequency converter.
Fieldbus option and connector.
LCP cradle.
Front covers (in various sizes).
Stickers.
Accessories bag (including EMC bracket).
Installation Guide.
®
MG33C602