Temperature Control Dial - Mitsubishi i-MiEV 2017 Owner's Manual

Blower speed selection dial
When the electric motor switch is in the
"ON" position, select the blower speed by
turning the blower speed selection dial.
Turning the dial clockwise will increase the
blower speed;
turning the dial counterclockwise will
decrease it. When the dial is set to the "OFF"
position, all fan-driven airflow will stop.
When the dial is set to the "AUTO" position,
the air flow is adjusted automatically accord-
ing to the temperature of the interior and the
position of the temperature control dial.

Temperature control dial

N00736500191
Use this dial to adjust the temperature of the
air flow from the vents.
Turn the temperature control dial clockwise
to make the air warmer. Turn it counterclock-
wise to make the air cooler.
When the dial is set to middle () position,
only uncooled and unheated air will flow.
When the dial is moved to middle () posi-
tion when using cooling or heating, cooling
or heating stops.
NOTE
 When the dial is moved from middle ()
position to the left while the air conditioning
is not operating, the air temperature will not
change.
NOTE
 When the dial is moved to middle () posi-
N00736600235
tion and then to the left while the air condi-
tioning is operating, the air conditioning
system is operating again.
 When the temperature control dial is set to
"C" position, the air selection will be auto-
matically set to the recirculation position and
the air conditioning will operate.
When the dial is moved thereafter, the air
conditioning continues to operate and the air
selection setting returns to the setting before
the dial was set to "C" position.
Mode selection dial
To change the position and amount of air
flowing from the vents, turn the mode selec-
tion dial. Refer to "Changing the mode selec-
tion" on page 7-2.
Comfort controls
Air conditioning
7
N00736700210
7-5