Mitsubishi i-MiEV 2017 Owner's Manual page 209

Air conditioning
"AUTO" position
The vents change to the following positions
according to the position of the temperature
control dial.
Refer to "Temperature control dial" on page
7-5.
Temperature control
dial position
7
Between "C" and mid-
dle()
Set the dial to
middle ()
from the "C"
side
Mid-
dle()
Set the dial to
middle ()
from the "H"
side
Near middle
Between
()
middle
() and
Near "H"
"H"
7-6 Comfort controls
CAUTION
 When using the mode selection dial between
the " " and "
ging by pressing the air selection switch to
select outside air. (Refer to "Air selection
switch" on page 7-6.)
Air selection switch
Vents
: Upper part Normally, use the outside air position to keep
of front passen-
the windshield and side windows clear and to
ger compart-
quickly remove fog or frost from the wind-
ment
shield.
: Upper part
To change the air selection, simply press the
of front passen-
air selection switch.
ger compart-
ment
 Outside air {Indicator light (A) OFF}
Outside air is introduced into the passen-
ger compartment.
: Leg area
 Recirculated air {Indicator light (A) ON}
Air is recirculated inside the passenger
compartment.
: Leg area
: Leg area,
windshield, and
door windows
" positions, prevent fog-
N00736800400
If high cooling performance is desired, or, if
the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
CAUTION
 Using recirculated air for a long time may
cause the windows to fog up.
 When the mode selection dial is set to the
"
pressor runs automatically. Outside air intro-
duction will also be selected automatically.
 When the temperature control dial is set to
the "C" position, the air selection will be
automatically set to the recirculation posi-
tion.
NOTE
" position, the air conditioning com-