Mitsubishi i-MiEV 2017 Owner's Manual page 273

Replacement of light bulbs
3. Move the light unit toward the rear of the
vehicle and remove the pins (B) of the
light unit from the vehicle.
9
4. Turn the socket counterclockwise to
remove it.
9-26 Vehicle care and maintenance
C- Tail and stop light (LED) - cannot be
replaced
D- Rear turn signal light
E- Back up light
NOTE
 The tail and stop lights use LEDs rather than
bulbs.
For repair and replacement, contact a certi-
fied i-MiEV dealer.
5. Pull the bulb out of the socket.
6. To install the bulb, perform the removal
steps in reverse.
Rear side-marker lights
1. Remove the clips (A), then lift the cover
(B).
2. Turn the socket (C) counterclockwise to
remove it.
N00935400108