How Do I Adjust The Contrast - Raymarine ST7002 Operating Manual

12

How do I adjust the contrast?

To set the display contrast level:
1. With the autopilot in Standby mode, press the disp button for one second to
access the LAMP screen.
2. Press the disp button for one second again, to display the CONTRAST
screen.
3. Use the up and down arrow buttons to set the required contrast level (from
1 to 15).
4. The display automatically returns to the previous mode if you do not press a
button for 10 seconds:
if you press another mode button within 10 seconds you will select the mode as-
Note:
signed to that button (for example: auto selects Auto mode, standby selects Standby
mode).
ST7002 SmartPilot Controller Operating Guide