Advertisement
3/8 X 3"i
SECURELY
attach the 100 LEG PRESS lo the FRONT LEG (1) using two 3/8" X 3" BOLTS (9), four 3/8" WASHERS
(6),
two 3/8" LOCK NUTS (7). See FIGURE
¯ Route LEG CABLE (2) around the 3-1/2" PULLEY on the LEG PRESS as shown in FIGbqtE 5. (NOTE: Pulley may need to
temporarily removed.)
¯ Attach the end of the LEG CABLE (2) to the QUICK DISCONNECT
LINK (5). See FIGURE
¯ SECURELY
tighten the QUICK DISCONNECT
(5) to the tab on the FRONT LEG (1) as shown in FIGURE
Advertisement
