Related Manuals for ParaBody Parabody 821
Summary of Contents for ParaBody Parabody 821
- Page 1 821 HYPEREXTENSION ROMAN CHAIR WARNING: Read and follow all directions for each step to insure proper assembly of this product. USER’S GUIDE CLASS H PART # 7349201 REV. A Version: 821108 Revision: 09/24/02...
-
Page 2: Important Safety Information
Use only the pin provided by the manufacturer. If unsure, call your authorized ParaBody dealer. NOTE: In a continual effort to improve our products, specifications are subject to change 2001 Life Fitness, a division of Brunswick Corporation. All rights reserved. © ParaBody is a trademark of Brunswick Corporation www.parabody.com... -
Page 3: Important Notes
Please note: * Thank you for purchasing the ParaBody 821 Gym System. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated. - Page 4 1’ 1’ 2’ 3’ 4’ 5’ 2’ 3’ 1 Square = 1’ X 1’ 4’ 5’...
-
Page 5: Parts List
PART # DESCRIPTION 6588710 ROLLER PAD SUPPORT 6511709 BASE TUBE 6588309 HIP PAD SUPPORT 6588509 CROSS BRACE 6588909 FRONT UPRIGHT 6589109 REAR UPRIGHT 6589321 PAD ASSEMBLY 6194601 ROLLER PAD 3235205 3/8 X 1-1/4” BOLT 3235212 3/8 X 3” BOLT 3235312 1/2 X 3”... - Page 6 1/2 X 3” FIGURE 2 STEP 2: • Insert four 2” SQ. COVER CAPS (17) into the ends of the BASE TUBES (2) as shown in FIGURE 2. • SECURELY assemble the BASE TUBES (2) to the FRONT and REAR UPRIGHTS (5 & 6) using four 1/2 X 3” BOLTS (11), four 1/2”...
- Page 7 FIGURE 3 STEP 3: • Insert two 3 X 2” INSERT GUIDES (21) into the end of each of the ROLLER PAD SUPPORT (1) as shown in FIGURE 3. • SECURELY assemble the SPRING PIN ASSEMBLY (22) to the ROLLER PAD SUPPORT (1). See FIGURE 3. •...
- Page 8 FIGURE 5 STEP 5: • Insert two 2” SQ. END CAPS (23) into the ends of the HIP PAD SUPPORT (3) as shown in FIGURE 5. • SECURELY assemble the HIP PAD SUPPORT (3) to the FRONT UPRIGHT (5) using two 3/8” X 3” BOLTS (10), four 3/8”...
-
Page 9: Maintenance
* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION. REMEMBER TO FILL OUT YOUR WARRANTY REGISTRATION CARD AND MAIL BACK. Thank you for purchasing the ParaBody 821 Gym System. MAINTENANCE MODEL #________________________ SERIAL #_________________________... -
Page 10: Limited Warranty
ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired or replaced by ParaBody. -
Page 11: International Offices
Life Fitness Italia S.R.L. Via Elvas 92 39042 Bressanone Italy Phone: 39 (472) 835-470 Fax: 39 (472) 833-150 Life Fitness Asia Pacific Limited Room 2610, Miramar Tower 132 Nathan Road, Tsimshatsui Kowloon, Hong Kong Phone: (852) 2891-6677 Fax: (852) 2575-6001 www.parabody.com...
Need help?
Do you have a question about the Parabody 821 and is the answer not in the manual?
Questions and answers