Ford Mustang 2017 Owner's Manual page 208

Adding Engine Oil
Quantity
1 L (0.2 gal)
Specifications
Materials
Engine Oil - 5W-20
Antifreeze Super Plus Premium Ready Mix
2U2J-19544-xxxx
Brake Fluid DOT 4 LV High Performance
BU7J-M6C65-xxxx
Automatic Transmission Oil C-ML5
7U7J-M2C938-AB
Transmission Oil - 75W FE
7U7J-M2C200-BA/CA
Screen Wash
2U7J-M8B16-AA/CA/DA, 3U7J-19523-GA,
FU7J-19C544-AA/BA/DA/EA/GA/HA
Only use fluid that meets Ford
specifications.
If you are unable to find an engine oil that
meets the specification defined by
WSS-M2C948-B, it is acceptable to use a
SAE 5W-20 engine oil that is defined by
ACEA A5/B5.
Note: Do not use more than 1 L (0.2 gal)
between scheduled service intervals.
Note: For complete refill of limited slip Ford
axles, contact an authorized dealer. Ford
rear axles contain a synthetic lubricant that
does not require changing unless you
submerge the axle in water.
Mustang (CZG, CZY) Vehicles Built From: 02-05-2016, HR3J 19A321 AKA enGBR, First Printing
Capacities and Specifications
Name
The quantity of engine oil required to raise
the indicated level on the dipstick from
minimum to maximum.
Using oil and fluids that do not meet the
defined specification and viscosity grade
may lead to:
• Component damage which may not be
covered by the vehicle Warranty.
• Longer engine cranking periods.
• Increased emission levels.
• Reduced engine performance.
• Reduced fuel economy.
• Degraded brake performance.
E115472
We recommend Castrol and Ford engine
oils and lubricants.
204
Specification
WSS-M2C948-B
WSS-M97B44-D2
WSS-M6C65-A2
MERCON® LV
WSS-M2C938-A
WSS-M2C200-D2
WSS-M14P19-A