Ford Mustang 2017 Owner's Manual page 187

Removal of the sealant canister from
the kit
E175984
1. Unwrap the dual purpose hose (black
tube) from the compressor housing.
E175985
2. Unwrap the power cord.
E175986
3. Remove the back cover.
Mustang (CZG, CZY) Vehicles Built From: 02-05-2016, HR3J 19A321 AKA enGBR, First Printing
Wheels and Tires
E175987
4. Rotate the sealant canister up 90
Installation of the sealant canister to
the kit
1.
2. Rotate the canister 90 degrees down
E175988
3. Snap the back cover back into place.
183
degrees and pull away from
casing/housing to remove.
With the canister held perpendicular
to the housing, insert the canister
nozzle into the connector and push
until seated.
into the housing/casing.