6 Settings
6
Settings
6.1
List of parameters
Tab.11 Functions accessible with the shortcut key
Parameter
Standby/operation
316:Hot water boost
Central heating mode CH1
Room temperature CH1
Hot water heating
Hot water temp setpoint
Tab.12 Menu Information
Information
Room temperature
Room temperature min
Room temperature max
Boiler temperature
Outside temp
20
POWER HT +
6.1.1 Shortcuts menu
Description
Boiler standby / start-up
Forcing domestic hot water pro
duction.
Boiler operating mode.
Room temperature set point in
comfort mode.
Setting domestic hot water pro
duction.
Domestic hot water temperature
set point.
6.1.2 Information menu
Description
Is displayed if the control system unit is configured as a room
temperature appliance
Boiler flow temperature
Outside temperature
Adjustment range
Standby : Boiler put on standby.
The symbol
is displayed.
The boiler's operating modes are deactivated.
The frost protection function is activated.
On : Putting the boiler into operation
On :
Activates forcing of domestic hot water.
The symbol
is displayed.
If a domestic hot water tank is connected to the
boiler circuit, the boiler will give priority to forcing
heating of the DHW tank, independently of the
other parameters.
Off : Deactivates forcing of domestic hot water.
On :
Heating is always activated.
The symbols
,
and
1 2 3
Reduced :
Heating is deactivated.
The symbols
,
and
1 2 3
Timed :
Heating is dependent on the time range program
med.
The symbols
and
1 2 3
Off :
The boiler is shut down and frost protection is ac
tive.
The symbol
is displayed.
On : Enables domestic hot water production.
Off :
Disables domestic hot water production.
The symbol
disappears from the display.
Eco : Not used.
are displayed.
are displayed.
are displayed.
Value
°C
°C
7609475 - v04 - 15072015