Settings; Access To User Parameters; List Of User Parameters - Baxi 228 Combi 2 User Manual

6 Settings

6 Settings
6.1

Access to USER parameters

Fig.7 Accessing the user parameters
6.2

List of USER parameters

Tab.9 Table of parameters
Name Description
CH operation
AP016 0: Off
1: On
Domestic hot water (DHW)
AP017 0: Off
1: On
Average external temperature [°C] when switching from summer/
AP073
winter mode (with outside sensor)
Force summer mode (with outside sensor)
AP074 0: Auto according to AP073
1: Summer
Anti-legionella function
0: Disabled
DP004
1: Weekly
2: Daily (only available with Room Unit)
Domestic hot water temperature setpoint.
DP070 In the case of operation with a calorifier tank and programming via
room unit corresponding to the comfort setpoint [°C]
DHW mode:
0: Domestic hot water programming (only available with Room Unit)
1: Manual (boiler with calorifier tank) – Preheating active (instanta­
DP200
neous boiler)
2: Antifreeze (boiler with calorifier tank) – No preheating (instantane­
ous boiler)
16 200 Combi 2
To display/modify the list of USER parameters, proceed as follows:
press the + keys simultaneously, the symbol
bar starts to flash;
turn the knob until the
knob until you reach the required setting. Press the
turn the
to confirm;
modify the value of the parameter using
the Press the key to confirm;
Press the key to exit.
Important
The factory settings for certain settings may differ based on the
market the product is destined for.
appears. Press the
knob;
Factory Mini­ Maxi­
value mum mum
1 – –
1 – –
22 10 30
0 – –
0 – –
60 35 60
2 – –
on the menu
key to confirm;
key
Level
User
User
User
User
User
User
User