Monitoring NI Modules
Monitoring NI Modules
Front Panel LEDs
All NIs provide a series of status LEDs located on the front panel. These LEDs offer basic status informa-
tion for the following functions:
NI hardware operation
•
NI software status
•
Port link and activity status
•
Accessing General NI Information
The switch's Command Line Interface (CLI) offers NI monitoring commands. These commands allow you
to access general NI hardware information as well as the current operating status.
To access general NI information, use the
-> show ni 6
Module in slot 6
Model Name:
Description:
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
Firmware Version:
Admin Status:
Operational Status:
Power Consumption:
Power Control Checksum:
MAC Address:
ASIC - Physical 1 (hex):
For more information about this display and other NI monitoring commands, see the "Chassis
Management and Monitoring Commands" chapter in the OmniSwitch CLI Reference Guide.
page 4-12
show ni
command. For example:
OS9-GNI-U24E,
24PT FIB GIG MOD,
902073-10,
B13,
3056018A,
MAR 05 2005,
6,
POWER ON,
UP,
100,
0x88d,
00:d0:95:8a:09:b8,
1a01 1a01 1a01 1a01 0101 0101 0101 0101
OmniSwitch 9000E Series Hardware Users Guide
Network Interface (NI) Modules
December 2008