Standards Compliance
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and EMC
standards:
All hardware switching modules used in an OmniSwitch 9000 Series switch comply with Class A stan-
dards. Modules with copper connectors meet Class A requirements using unshielded (UTP) cables.
Safety Standards
UL 60950
•
CAN/CSA-C22.2 No. 60950-00
•
EN 60950-1:2001; all deviations
•
IEC 60950-1:2001; all national deviations
•
AS/NZS TS-001 and 60950: 2000, Australia
•
UL-AR, Argentina
•
TUV,UL-GS Mark, Germany
•
NOM-019 SCFI, Mexico
•
EN 60825-1 Laser
•
EN 60825-2 Laser
•
CDRH Laser
•
CB Certification per IEC 950
•
EMC Standards
FCC Part 15 (CFR 47) Class A
•
ICES-003 Class A
•
EN 55022 Class A
•
CISPR 22 Class A
•
AS/NZS 3548 Class A
•
VCCI Class A
•
EN 55024: 1998 (Immunity)
•
EN 50082-1
•
EN 61000-3-2
•
EN 61000-3-3
•
EN 61000-4-2
•
EN 61000-4-3
•
EN 61000-4-4
•
EN 61000-4-5
•
EN 61000-4-6
•
EN 61000-4-8
•
EN 61000-6-2
•
EN 61000-6-4
•
ENC 1000-4-11
•
page A-4
Regulatory Compliance and Safety Information
OmniSwitch 9000E Series Hardware Users Guide
December 2008