Ratoc Systems CBFW3 User Manual page 68

3.How to install the driver:CBPRSET.SYS or MERPSET.SYS
You have already installed the driver [Texas Instruments OHCI Compliant IEEE 1394
Host Controller].
You should replace it to the new "RATOC 1394 CardBus Card(TI OS Version)" driver.
You can replace it, simply following the instructins:
1.Insert the CBFW3 PC Card into the PC Card slot.
2.Click My Computer with the right button of the mouse.
3.Select Properties.
4.System Properties windows will appear.
5.Click the Device Manager tab.
6.Double-click "1394 Bus Controller" icon.
You can find a [Texas Instruments OHCI Compliant IEEE 1394 Host Controller] as
shown below and select it and click the [Properties] button.
64