Ratoc Systems CBFW3 User Manual page 46

8.You will see the screen. Click [OK] to continue.
9. The Batch Capture dialog box will be shown. Click [RUN] to start batch capture.This
application searchs automatically the timecode you have just set and starts to capture video
images and saves the file in the folder written in the "Export Directory" under the name of
Video + (number) starting 1 + .avi as shown below. When batch capture is finished,
"Capture Complete!" message will appear.Click [END] to finish batch capture.
NOTE
To capture correct DV file, you have to use original DV footages which has
continuous Timecode(recording). If the original DV footage has intermittent
Timecode, sometimes it may cause system freeze or may not be captured.
42