Table of Contents
Advertisement
Step2.Verify the OHCI driver installation
To verify the OHCI driver installation,follow the steps.
1.Click My Computer with the right button of the mouse.
2.Select Properties.
3.You will see the screen below. Click the Device Manager tab.
4.Double-click "1394 Bus Controller".
5.If there is a Texas Instruments OHCI Compliant IEEE 1394 Host Controller string
without any yellow "!" marks or red "X" marks under the 1394 Bus Controller,
the OHCI driver for the CBFW3 is installed correctly.
Check here
16
Advertisement
Table of Contents
Need help?
Do you have a question about the CBFW3 and is the answer not in the manual?