Advertisement
Surface burner fails to light
a. power supply not connected
a. connectpower,checkcircuit
breakeror fuse box
b. air in the gas line_
b. see page 7 for instructionson
bleeding air from the gas line
c. cloggedburner port(s)
c. clean portswith straight pin
d. surface control not Completely
d. turn controlto the LITEpositionuntil
turnedto the LITEpositionor turned
the burner ignites, then turn control
too quickly from the LITEposition
to desired flame size
e. powerfailure
e. see page 7 to light burner during a
power failure
f. sealed burner models: Burner will
.f. clean and dry burnerhead.lfbroken
not light if the ignitor is damaged,
or damaged,call a serviceman.
soiled, wet or if the port directly
belowthe ignitoris blocked.
Burner flame uneven
a. clogged burner port(s)
a. clean ports with straight pin
Surface burner flame
a. air/gas mixture notproper
a. call servicemanto adjustburner
• lifts off port
b. no pan in place
b. always place pan on grate before
yellowin color
lightingburner.
NOTE: Lifting of flame is normal for
NOTE: Be sure installer propedy
sealed burners. Some yellow tipping
adjustedrange at time of installation.
with LP gas is normaland acceptable.
Surface burner ignitor
a. controlknob is in the LITE position,
a. be sureALLsurface burner control
producting clickingsound
NOTE:The life of the ignition
knobsare inthe OFF positionorare
systemmay be shortenedifthe
adjusted tothe desiredflame
knobis left inthe LITE position,
setting
b. surfacecontrol s witchis moistas a
b. allowswitchto drythenrelight
resultof cleaning the range,
burner
c. malfunctioning s witch
c. call serviceman to check
Oven burnerfails to light
a. powersupply notconnected
a. connect power, check circuit
breakeror fusebox
b. powerfailure
b. ovenwillnotoperate during a power
failure
c. ovenincorrectly set
c. See pages5 or 12
d, Automatic OvenCooking feature
d. See page 16
incorrectly set
Popping sound heard when
Thisis a normalsound thatoccurswithsometypesofgaswhena hotburneristurned
burner extinguishes
off.The popping soundis nota safetyhazardand will notdamagethe appliance.
Clock and/or oven light
a. powersupply not connected
a. connect p owersupply, c heckcircuit
does not work
breakeror fuse box
b. bulbmaybe looseor burnedout
b. tightenor replacelight bulb
c. malfunctioningswitch, starter or
c. call servicemanto check
ballast
d. call servicemanto check
d, malfunctioningclock or loose wiring
Advertisement
