Advertisement
MAINTENAN(:E
The cooktopfeaturing conventionalsurface burnerslifts
Burnergrates must be properly
up for easy cleaning of the burner box area.
positionedbefore cooking. Burner grates
are durable but may gradually lose their
To raise the "lift-up" cooktop:When cool, grasp the
shine due to usage and high
front edgeof the cooktop and gently lift up until the two
temperatures.
support rods at the front of the cooktop snap into place.
Gratesfor the porcelain cooktopare
square. When installing square grates,
place indentedsides together so straight
sides are at front and rear.
CAUTION: Do notoperatea surface burnerwithouta
I
panon the grate. The porcelainfinishonthe grate may
chip withouta pan to absorb the intense heat from the
burnerflame.
To lower the top: Holdthe front edge of the cooktopand
carefullypush back on each support rod to release the
notched support.Then gently lower the top into place. The
supportrodswill slideintothe cooktopframe.
CAUTION: Beforereplacingthe light bulb,
DISCONNECTPOWERTO RANGE.Be surethebulb
is cool.Do nottoucha hotbulb witha dampclothas
the bulbmay break.
The sealedburnercooktopisdesignedwithtwocontour
wellsto catchand contain spills.Becauseof thisdesignit
To turn on oven light: Pushthe rockerswitchlocatedon
is notnecessary to lift upthe cooktop to clean
the backguard.
underneath. T opreventdamageto the gastubingortop,
To replace oven light bulb:
do notattempt to liftor removethecooktop.
1. Disconnect p owerto range.
2. Holdbulbcoverin placethenslidewireretaineroff
cover.NOTE; BulbCover willfall ifnot heldin place
whileremoving wireretainer.
3. Removebulbcover.
4. Removelightbulband replace with a 40 watt appliance
bulb.
5. Replacebulb cover and secure with wire retainer.
6. Reconnectpowerto range. Resetclock.
BULB COVER
\
WIRE
RETAINER
Advertisement
