Technogym element+ Chest Press User Manual page 18

replacing the weight stack cable
- put in the screws (A), put in the adjuster (C), and tighten the lock nut (B);
- replace the back panel of the weight stack (following the instructions found in
the section Removing the weight stack panel in reverse order).
WArnInG
ALWAYS use cables supplied directly by Technogym.
The cables must always be replaced at the first sign of wear, even if it only affects
the outer rubber protection.
WArnInG
Every month, carefully inspect the condition of the cables.
Chest Press
A
04206032
C
B
18