Figure 29 Kvm Port Settings Screen; Kvm Ports - Raritan MCIP18 User Manual

C 4: R M O 33
HAPTER EMOTE ANAGEMENT AND PERATION
Vertical Frequency (Hz): The vertical (refresh) frequency in Hz.
Total horizontal pixels: The total amount of pixels per line, including the non-visible and
blanking area.
Polarity: The polarity (positive/negative) of the synchronization signals (V is vertical, H is
horizontal).
Description: Provide a mode name that will appear in the Remote Console when this custom
mode is activated.
Click Apply to apply your changes.

KVM Ports

Figure 29 KVM Port Settings Screen

In the Active KVM Port panel, click on the Active Port drop-down arrow and choose a KVM
port from the list.
Click Switch to activate the KVM port.
In the KVM Port Settings panel, specify the settings for each port.
Nr: The number of the port.
Name: The name or a description of the computer/network that is accessible using this port.
Show in Console: If checked, the port name, above, will be visible in the Remote Console.
Click Apply to apply your changes.