Ed4: Drying Relays Faulty - Electrolux EWM25 series Service Manual

Ed4
Checks to perform:
Measure across terminals J8-3, J8-4 of the
connector and the structure of the appliance.
– (see fig. 40) –. Is the circuit open?
Detach the connectors A2 and B2,
measure directly on the terminals of the
heater and the earth contact. Is the circuit
open?
Detach the connectors A1 and B1,
measure directly on the terminals of the
heater and the earth contact.
Is there any leakage?
Detach the connector of the thermostat with
manual reset, measure directly on the
terminals of the thermostat and the earth
contact. Is there any current leakage?
Measure between the wiring terminals A1
and B1 (drying heater) and the structure of
the appliance. – (see fig. 41) –
Is there any current leakage?
Detach the connector J5 (WD board) and
measure between j5-1 the structure of the
appliance. – (see fig. 42) –
Is there any current leakage?
Measure between the terminals J8-, J8-2 of
the wiring connector and the structure of
the appliance. – (see fig. 40) –
Is the circuit open?
Detach the connector of the fan motor and
measure directly between the terminals and
structure of the appliance.
Is the circuit open?
Replace the fan motor and restart the
diagnostic cycle to check for further alarms.
07-2010 SOI/DT-mdm FCPD-dp Quality-fz

ED4: Drying relays faulty

Check that all the connectors are inserted correctly
NO
NO
NO
NO
NO
NO
NO
NO
Replace the WD board and restart the
YES
diagnostic cycle to check for further
Replace the wiring and restart the
YES
diagnostic cycle to check for further
YES Replace the drying heater and restart
the diagnostic cycle to check for further
YES
Replace the thermostat with manual
reset and restart the diagnostic cycle to
check for further alarms.
Replace the wiring and restart the
YES
diagnostic cycle to check for further
Replace the wiring and restart the
YES
diagnostic cycle to check for further
Replace the WD board and restart the
YES
diagnostic cycle to check for further
Replace the wiring and restart the
YES
diagnostic cycle to check for further
102/121
alarms.
alarms.
alarms.
alarms.
alarms.
alarms.
alarms.
599 70 99-00
Ed4