User Customization; Figure 31 User Profile Menu - Raritan II User Manual

26

User Customization

When the OSUI is active, invoke the User Profile Menu by pressing function key [F4]. This menu displays
Paragon II's configuration and allows you to set preferred operating parameters for individual user
accounts.
To view or change your user profile:
1. If the OSUI is not already active, activate it by pressing the hotkey (factory default is [Scroll Lock])
twice in quick succession.
2. Press [F4] to access the User Profile screen. The topmost fields are identifiers that cannot be changed
by the user:
a. The Connected field displays the name and channel port ID of the currently selected device or
server, if you are currently connected to a channel port.
b. The User field displays the user name you entered at login.
c. The User Port field shows which user port on the Base Unit your User Station and user station are
attached to.
d. The Admin field shows whether or not you have Administrator privileges.
e. The Group field displays the user's group ID(s) (see Chapter 4, Operation – Administrator
Functions, Group Settings).
3. To change any of the other fields, use your keyboard keys to select the field you want to edit: Press
[Tab] to move forward through the editable fields, [Shift]+[Tab] to move backward, the up- and
down-arrow keys to move up and down, and the left- and right-arrow keys to move left and right.
Press the [Enter] key to begin editing; the highlighted area will turn green, and the prompt in the
prompt/message bar will change to "-Change Ent-Done ESC-Cancel." Follow the instructions below
for interpreting and editing each specific User Profile parameter.
When finished, press either the [Enter] key to retain the changes (the highlighted area will turn yellow)
or press the [Esc] key to cancel the changes. The prompt in the prompt/message bar will change to
"Save the changes (Y/N/ESC)" (It will do this before you leave the screen if you pressed a function
key.) Press [S] to save the changes to long-term memory, [N] to discard your changes, or [Esc] to
discard your changes and exit the menu.
Note: When you type in new numeric values, always use the number keys at the top of your keyboard rather
than the number keys on your keypad. Paragon does not support the keypad number keys.

Figure 31 User Profile Menu

P II U M
ARAGON SER ANUAL