Deburring Cover For Poda - KEF PSD 5 Instruction Manual

8. Make workshop
kidproof with
padlocks, master
switches, or by
removing starter keys.
10. Use right tool.
Don't force tool or
attachment to do
a job it was not
designed for.
12. Always use safety
glasses. Also use face or
dust mask if cutting
operation is dusty.
Everyday eyeglasses only
have impact resistant
lenses. They are NOT
safety glasses.
14. Don't
overreach.
Keep proper
footing and
balance at
all times.
16. Disconnect tools before
servicing and when changing
accessories such as grinding
wheels, polishing mops,
grinding belts, blades, bits,
cutters, etc. Never leave a
running maschine, wait till the
Machine has stopped. If parts
of the machine are out of order
the Machine shold not be used
befour it has been repaired.
18. Use recommended accessories. Consult owner's
manual for recommended accessories. Use of
improper accessories may cause risk of injury to
persons.
9. Don't force tool. It will
do the job better and be
safer at the rate for
which it was designed.
.
11. Wear proper apparel. Wear no loose clothing,
gloves, neckties, rings,
bracelets, or other
jewelry which may get
caught in moving parts.
Non-slip footwear is
recommended. Wear
protective hair covering
to contain long hair.
13. Secure works. Use
clamps or vise to hold
works, when pratical. It's
safer than using your
hands and it frees both
hands to operate tool.
15. Maintain tools with care. Keep tools sharp and
clean for best and safest
performance. Follow
instructions for lubricating
and changing accessories.
17. Reduce the risk of
unintentional starting.
Make sure switch is in off
position before plugging
in.
19. Never work in a way that can hurt you. Do not
stand in a bent position. Stand straight. Alkohol and
other drugs are not to be taken while working with
the machine.
5