KEF PSD 5 Instruction Manual page 2

Introduction
You can connect your dual grinder in many ways. This manual includes the following
options for use of your dual grinder:
 PSD 5 for grinding,
 BO 50/5 for grinding and belt grinding
 POD 5 for polishing
 PODA 5 for polishing and deburring
EU declaration of conformity
hereby declares that
KEF Double Ended Grinder PSD 5, BO 50-5, POD 5 are manufactured in accordance
with the provisions of the COUNCIL DIRECTIVE of 17. May 2006 (2006/42/EC) – The
Machinery Directive (order no. 561 of 25 June 1994 with subsequent amendments)
Also on accordance with:
 The council directive of 19 February 1973 (73/23/EEC) – The Low Voltage Directive
– with later amendments (order no. 797 of 30 August 1994)
 The council directive of 3 May 1989 (89/336/EEC) – The EMC Directive – with later
amendments (order no. 796 of 5 December 1991 with subsequent amendments)
KEF-MOTOR A/S
Industrivej 3-9
DK-9460 Brovst
Denmark
www.scantool-group.com
Tel.: +45 98 23 62 66
Fax: +45 98 23 61 44
1