Polishing Machine; Adjustment The Polishing Machine - KEF PSD 5 Instruction Manual

6 Polishing machine

6.1

Adjustment the polishing machine.

Placing of the machine must take place on a firm and level surface. Now secure the
polishing machine to the work table or the floor by using the four holes in the base used for
mounting the machine to the pallet.
Please wire the machine according to the given voltages stated in this manual and on the
motor sign. Check for correct direction of rotation on the motor. All wiring must be
performec by an authorized electrician.
Fig.: 6.1
Before start operating please check if the polishing discs (A) (see fig.: 6.1) are firmly
secured to the rotor. The polishing disc is mounted when the machine is disconnected. The
polishing disc (A) must rotate freely without being loose.
Checks and adjustments are only to be performed when the machine is disconnected.
Make sure to be in a safe distance from the machine while it is running for the first time.
13