Elcometer 204 Operating Instructions Manual page 2

R
The Elcometer 204 Steel Ultrasonic Thickness Gauge has been tested in accordance with EU
regulations governing Electro-magnetic compliance and it meets the required directives.
is a registered trademark of Elcometer Limited.
All other trademarks acknowledged.
© Copyright Elcometer Limited. 2009.
All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored (in a retrieval
system or otherwise) or translated into any language, in any form or by any means (electronic, mechanical,
magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Limited.
A copy of this Instruction Manual is available for download on our Website via www.elcometer.com/
downloads.
Doc.No. TMA-0410 Issue 03
Text with Cover No: 20018