1MAC051065-MB C
5.7
615 series ANSI
Installation Manual
Energizing the IED
Before you connect the auxiliary power, check that the terminal strip is wired and
placed correctly.
During the start-up all LEDs are lit for a short period.
•
Green Normal LED starts to flash
•
LCD lights up and IED start-up is displayed
•
The main menu is displayed. A steady green Normal LED indicates a successful
start-up.
If the IED detects a diagnostic error during start up, the green Normal LED flashes and
the internal fault code is displayed on the LCD.
Section 5
Connecting
39