Instrument Connection; Osd Menu - Security Tronix ST-HDoC User Manual

3.2 Instrument connection

⑴ .
The camera or speed dome to be tested should be connected to the "VIDEO IN" port.
⑵ .
The ST-HDoC "VIDEO OUT" interface is for connecting to an auxiliary BNC monitor.
⑶ .
Connect the camera or the speed dome's RS485 controller cable to the tester's RS485 interface
(Note positive and negative connection of the cable).

3.3 OSD Menu


Press the

Press the
the meter to automatically power off.

Enter the menu ,choose one function to enter , then short
press the

While in the main menu, pressing

While in the main menu, continuously press the key
selection is made, press the key
ST-HDoC / ST-HDoC-MM
key to turn the tester on.
key again to turn off, you can also set
key,
to enter.
quickly switches to the different menu lists.
to select different function. Once a
13