Table of Contents
Advertisement
Press the
key with single clicks, to search for PTZ ID one address at a time. When the ID is
discovered, the PTZ camera will stop panning.
Manual address search: Press
when the address is found. Press the direction control button
Camera. Press the
3.3.6 CVI camera test
Connect a CVI camera to the ST-HDoC's "AHD, CVI, TVI" interface.
Press the
key to enter the tester's main menu, then press the
the
key to enter CVI test.
PTZ control (over coaxial cable, if the camera is equipped):
Press
key to open the menu, then press
control (UTC) and RS485 control.
PTZ control instructions, please refer to "3.3.1 PTZ control"
ST-HDoC / ST-HDoC-MM
or
to search the address gradually, the image will flash
button to quit.
20
to adjust the Speed Dome
keys to select CVI. Press
key to switch the control between coaxial
Advertisement
Table of Contents
