Ptz Controller - Security Tronix ST-HDoC User Manual


Press the
of the screen indicates the different pages of apps available.

Press the key
First page menu

3.3.1 PTZ controller

Connect an analog PTZ camera to the tester, and open the PTZ controller app. From this menu, you
can view the video stream as well as control PTZ movements. From within the PTZ app, you can also
configure parameters such as: Protocol, Baud Rate, Address,
Pan/Tilt speed, Preset call and recall.
PTZ controller parameter settings
In the "PTZ CONTROLLER " app（as shown in above photo）, press the
parameter settings .
Press the key
Press the key or
return.
ST-HDoC / ST-HDoC-MM
key to switch between menu pages, the square
to select the different function icon, then press the key
, to move the yellow cursor to select a parameter.
, to change the parameter values. Then press the
Second page menu
14
icon at the bottom
to enter
key to enter the
key to save and