Top Vent Adapter Installation; Rear Vent & Rear Vent To Top Vent Adapter Installation; Leg Leveling System - Quadra-Fire CASTILE-MBK-B Installation Manual

B. Top Vent Adapter Installation
3 to 3 inch Top Vent Adapter
3 to 6 inch Top Vent Offset Adapter
Installing the Top Vent Adapter
1. Put a layer of high temperature silicone on the 3 inch
(76mm) rear exhaust outlet. Do not put silicone inside
of pipe. Figure 19.1
2. Slide the top vent adapter onto the rear exhaust outlet
and adjust the assembly to a vertical position. Figure
19.1.
3. Drill 4 holes with #26 drill bit (provided) into the back of
the appliance using the outer shield as a pattern (make
sure the assembly is vertical). Figure 19.1.
4. Install the 4 mounting screws.
5. Drill 2 holes with #26 drill bit through the rear exhaust
outlet using the 2 holes already in the short horizontal
pipe in the top vent adapter as a guide. Install the 4
screws. Figure 19.2.
6. Install the vent pipe into the top vent adapter (be sure to
silicone all joints).
Offset Collar
3 to 6 inch
Top Vent Adapter
3 to 3 inch
Use hole on each side
as drilling guide
Figure 19.1
Mount with
4 screws
Figure 19.2
May 12, 2017
Rear Exhaust Outlet
Clean-Out Cover
7021-154J
C. Rear Vent & Rear Vent to Top Vent Adapter
Installation
1. Put a layer of high temperature silicone on the 3 inch
(76mm) exhaust outlet. Do not put silicone inside of
pipe. Figure 19.1
2. Slide the adapter onto the rear exhaust outlet and adjust
the assembly to the appropriate position.
3. Install the vent pipe into the adapter (be sure to silicone
all joints)
Rear Vent
Adapter
(811-0620)
Clean-Out Cover
Figure 19.3 - Rear
Figure 19.4 - Rear to Top Vent
Vent Adapter
Adapter - 90
D. Leg Leveling System
1. Thread Allen bolts through nuts until flush. Figure 20.5.
The Allen bolts and nuts are included in the component pack
inside the appliance firebox.
2. Slide assembled nuts and bolts into slots on legs with the
nuts on the bottom. Figure 19.6. Use a 5/32 in. (3.96mm)
Allen wrench to adjust legs up and down to desired level.
Figure 20.7.
Figure 19.5
Figure 19.7 - Bolt fully extended
CASTILE FREESTANDING
Top Vent
Adapter
(TPVNT-6)
Clean-Out
Cover
o
Figure 19.6
19