ProSoft Technology inRAx MVI46-GEC User Manual page 78

MVI46-GEC ♦ SLC Platform
Generic ASCII Ethernet Interface Module
Please Read This Notice • 2
Printing a Configuration File • 25
Procedures for Return of Units Out of Warranty • 70
Procedures for Return of Units Under Warranty • 69
Product Specifications • 7, 43
ProSoft Configuration Builder • 21
ProSoft® Product Documentation • 3
Purchasing Warranty Extension • 71
Read Block • 47
Reading Status Data from the Module • 33
Redisplaying the Menu • 36
Reference • 7, 43
Required Hardware • 33
Resetting diagnostic data • 37
Return Material Authorization (RMA) Policies and
Conditions • 68
Returning to the Main Menu • 40
RS-232 Configuration/Debug Port • 57
Server Control Word Codes • 51
Server State List • 55
Service Port Number • 26
Set Module Parameters • 24
Set Up the Project • 22
Setting Jumpers • 12
Start Here • 7, 9
Support, Service & Warranty • 7, 67
Swap Rx Data Bytes • 27
Swap Tx Data Bytes • 27
System Requirements • 9
The Configuration/Debug Menu • 34
Time Limit for Bringing Suit • 73
Transferring the Configuration File from MVI46 module
to PC • 37
Transferring the Configuration File from PC to MVI46
module • 37
Transferring WATTCP.CFG to the module • 39
Transferring WATTCP.CFG to the PC • 40
Troubleshooting • 41
Un-repairable Units • 70
Using the Diagnostic Window in ProSoft Configuration
Builder • 34
Viewing Block Transfer Statistics • 37
Viewing Client Communication Status (Clients 10 to
14) • 38
Viewing Module Configuration • 37
Viewing Server Communication Status (Servers 0 to 4)
• 38
Viewing Server Configuration (Servers 0 to 4) • 39
Viewing the WATTCP.CFG file on the module • 40
Page 78 of 78
R
S
T
U
V
Viewing Version Information • 37
W
Warm Booting the Module • 38
What Is Covered By This Warranty • 71
What Is Not Covered By This Warranty • 72
Write Block • 49
Y
Your Feedback Please • 2
ProSoft Technology, Inc.
Index
April 30, 2008