Troubleshooting; Care - Radio Shack Light and Learn Remote Owner's Manual

1. On the remote control, press the desired device
key once.
2. Hold down until the red light blinks twice.
P
3. Press . The red light blinks twice.
9 9 0
4. To view the code for the first digit, press
the number of blinks (for example, if there are
three blinks, the first digit is 3) and write down the
number.
Note: The red light will not blink if the code digit is
a "0".
5. Repeat Step 4 three more times for each succes-
sive digit by pressing and releasing
X

Troubleshooting

If the remote control stops working after you have suc-
cessfully tested the control for each device, or if you
are unable to get the remote control to work at all, do
the following:
• Be sure you press the device key for the device
you want to control before you press any other
key.
• Confirm that your IR devices are working properly
by using the original remote control or the manual
controls.
• Replace the batteries.
If you have any other problems, call customer service
at 888-631-9859.

CARE

Keep the remote dry; if it gets wet, wipe it dry immedi-
ately. Use and store the remote only in normal temper-
ature environments. Handle the remote carefully; do
not drop it. Keep the remote away from dust and dirt,
24
Troubleshooting
. Count
1
, , and .
2 3 4