Do not inscribe letters on the gun body. It may cause the coating to peel off. MODELS JUPITER-K – Air Cap № – Fluid Tip Size – Type of Feed (P:Pressure) ← (№P1 Air Cap – Size FX (1.1mm) – Pressure) –...
SAFETY PRECAUTIONS This manual contains information that is important for you to know and understand. This information relates to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. Read and follow SAFETY PRECAUTIONS before using this equipment. FIRE OR EXPLOSION HAZARD 1. When spraying, adequate exhaust must be provided to keep air free of accumulations of flammable vapors which may cause fire or explosion.
Page 3
PREVENTIVE MAINTENANCE 1. Daily lubrication and cleaning is necessary to maintain the best condition of the gun. 2. To clean the gun body, wipe exterior with solvent dampened cloth. Do not submerge the gun body in solvent as any solids may get into the air passage causing troubles. 3.
Page 4
SERVICE CHECKS Problem Cause Correction Will not spray No pressure to gun. Check air and material lines. Adjusting Screw (13) not properly adjusted. Adjust. Improper spray pattern A,B - Material build up on the Air Cap or Fluid Tip. A,B - Clean the Air Cap or Fluid Tip. C,D - Incorrect fluid delivery or viscosity.