Floor Balance Adjustment; Adjusting The Gap Between The Upper Door - Beko GNE134621X Manual

Floor balance adjustment

A
If your refrigerator is unbalanced;
B
First unplug the product. The
product must be unplugged when
making the balance adjustment. There
is the risk of electric shock.
1
1- Ventilation cover is removed by
unscrewing its screws as illustrated
in the figure before the procedure.
You can balance your refrigerator by
turning the front legs of it as illustrated
in the figure. The corner where the
leg exists is lowered when you turn
in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone to
slightly lift the refrigerator will facilitate
this process.
2. After the balance issue is remedied,
install back the ventilation cover and
fasten the screws.
4
2 3
3. Remove the screws fastening the
lower ventilation cover using a Philips
screwdriver.
Adjusting the gap between
the upper door
C
You can adjust the gap between
the fridge compartment doors as
illustrated in the figures.
Door shelves should be empty when
adjusting the door height.
C
Using a screwdriver, remove the
screw of upper hinge cover of the door
you want to adjust.
11
EN