Page 1
P-10 Multifuel Boiler Caldera policombustible Operating, Cleaning Instrucciones de Funcionamiento, and Maintenance Instructions Limpieza y Mantenimiento for the USER para el USUARIO Combustibles fluidos Combustibles sólidos For fluid-fuel firing For solid-fuel firing...
Page 2
1 - Interruptor para el servicio del circulador. Pump On/off switch. 2 - Interruptor para el servicio del quemador. Burner On/off switch. 3 - Termostato de regulación / Control thermostat. 4 - Termostato de seguridad / Limit thermostat. 5 - Termohidrómetro / Combined temp. 6 - Regulador automático de temperatura.
1) Solid fuel Fluid fuel 7 - Turn ON the main switch for the power supply to reach the control panel (19). P-10-3 7.000 10.000 8 - Turn ON the switch on the control panel to start up the P-10-4 10.000...
At regular intervals* carry out the following operations: 3 - Open the firedoor and, with the aid of the brush (23), clean the flueways (25). * The frequency of this regular cleaning procedure will depend on how much the boiler works and the type of fuel used. 4 - Loosen the wing-nut (26) to detach the cleaning cover from...
Need help?
Do you have a question about the P-10-3 and is the answer not in the manual?
Questions and answers