Table of Contents
Advertisement
6-4. Advanced settings
a. Change VAST STB Home Transponder (TP)
In very low signal areas or in bad weather it may be an advantage to change the
home TP in your VAST receiver, this will allow the VAST receiver to search for the
strongest TP first.
※
Due to signal levels all channels may scan in but not be available.
b. SatKing VAST Receivers
i.
Press Menu_Select Installation and press "OK"_Enter Password 1234.
ii.
Press yellow button (TP Edit)_Change frequency to 11807.
iii.
Green bars should appear down the bottom of the TV screen, once this happens
press the red button. (start search)
c. UEC DSD 4121
i.
Press Menu_Select #6 Advanced Options and press "OK".
ii.
Select #2 Install Setup_press "OK".
iii.
Enter password 1234_Select #1 Sat Signal Setup_press "OK".
iv.
Select #1 Freq MHz_press "OK".
v.
Manually enter 11807 and press "OK". Select #5 Accept these settings and press "OK".
vi.
Select #4 satellite Rescan and press "OK".
ENGLISH - 13
Hide quick links:
Advertisement
Table of Contents
