Proper Use And Operation - SatKing ORBIT 85 User Manual

1-2. Proper use and operation

This product has been designed for fixed installation on vehicles with maximum speeds
of 130 km/h. It is designed to automatically aim an antenna at geostationary television
satellites. The power to the system is supplied by a standard vehicle electrical system
with a rated voltage of 12 Volts.
12V DC is default and recommended for use. If 24V DC has to be used, separate DC to
DC downconverter must be used.
Use of the equipment for any other purpose to the one specified is not permitted.
Please also note the following instructions from SatKing:
• It is not possible to add or remove components on this product.
• The use of other components other than those originally supplied.
• When completing installation you or your contractor must strictly follow all instructions
in the supplied user manual. Failure to follow the user manual may cause damage to the
SatKing ORBIT or your vehicle.
• The product does not require any regular maintenance; all service must be carried out at
approved service centre's.
• All relevant guidelines of the automotive industry must be observed and complied with.
• The equipment must only be installed on solid vehicle roofs.
• Avoid cleaning your vehicle with the mounted satellite system in a drive-through car
wash or a car wash with a high-pressure cleaner.
• The SatKing ORBIT comes with a 2 year warranty, for full warranty details please visit our
website www.satkingorbit.com.au
• After Sales Support Line 1300 139 255 or support@satking.com.au
• If you are using VAST all card activation and channel entitlement issue's are handled by
the VAST call centre 1300 993 376. Their hours are 9am till 12pm and 2pm till 4.30pm
QLD time.
ENGLISH - 3