Table of Contents
Advertisement
F. Cable holder installation 2
F-1
Get controller cable, signal cables, cable holder and gland
F-2
Put the cables inside the Cable holder as above picture.
F-3
Place the assembled cable holder inside the
tape markings. Drill three(3) 2mm holes
F-5
Apply sikaflex around cable holder and on the
top of the screws for waterproof
F-4
Fix cable holder on the vehicle roof with
three(3) of M4 x 20 screws at drill holes made
F-6
Connect cables to relative ports. Remove
electrical tape then tidy sikaflex before dry
ENGLISH - 20
Hide quick links:
Advertisement
Table of Contents
