G. LNB protection pad attachment
G-1
Attach LNB protection pad, placing one end by 24cm away from antenna port.
Check that LNB bracket sits on the pad properly and does not touch cables when home positioning
9-4. Battery connection
1
Get power input cable for battery connection
3
Plug the cables to the controller
(Power, signal, STB and controller cables)
2
12V DC
Match the power cables to the battery
polarities, red-red, black-black and yellow
ignition cable- ignition port of the vehicle
4
If desire to place the controller on the wall, fix it
with provided bracket and screws
Once all cables are connected, connection part
can be hidden using rear cable cover
ENGLISH - 21
LNB protection pad
ORBIT (24 cm)
Ignition