How To Assemble Dish (Reflector) - SatKing ORBIT 85 User Manual

3. How to assemble dish (reflector)

Step 1 : Press POWER button on the controller to turn on the unit and press OK button on
any satellite
Step 2 : When reflector bracket is lifted up to vertical direction(about 90 degrees), turn
the unit off
Step 3 : Connect the reflector to the reflector bracket
Reflector bracket is connected to
LNB arm is connected to
Connect LNB cable to body
and align using cable clamp.
Step 4 : Combine LNB arm with reflector bracket
Step 5 : Connect LNB cables and auto skew cable to the connector on the body, and cover
the connectors on both sides with waterproof cap for protection
Step 6 : Align LNB cables on the body using cable clamps
※ To avoid cable damage, fix LNB cable and auto skew cable as enlarged image
on following page.
Step 7 : Power on and check the installation is completed by selecting HOME position
the reflector
reflector bracket
ENGLISH - 7