Table of Contents
Advertisement
B. Screw 6pcs of M4x20 bolt to fix the mounting plate
B-1
Place the mounting plate on the sikaflex and
make 6 holes (2mm) with a power drill
B-3
Insert screws
C. Apply sikaflex between mounting plate and electrical tape
C-1
Apply sikaflex around mounting plate edge
C-3
Remove electrical tape and allow to dry
B-2
Apply sikaflex on the holes
B-4
Re-apply sikaflex to cover bolts screwed
C-2
Clean away the excess sikaflex
C-4
Prepare to place the antenna on to the four
upright bolts
ENGLISH - 18
Hide quick links:
Advertisement
Table of Contents
