Maintenance - ProGear 300LS Owner's Manual

Regular maintenance of your equipment is necessary to extend the life and will allow it to continue
to function properly. Please keep the elliptical equipment, especially the computer console, out of
direct sunlight to prevent screen damage or premature wear.
Cleaning
Keep the machine clean and free of any debris by vacuuming around the moving parts and wiping the
machine down with a clean cotton cloth. The elliptical equipment can be cleaned with a soft cloth and mild
detergent. Do not use abrasives or solvents on the plastic parts. Be careful to not get excessive moisture on
the computer console display panel as such actions might cause an electrical hazard or electronics to fail.
Immediately wipe your perspiration off the elliptical equipment after each use and to keep it clean for the
next use.
Lubrication
Make sure to lubricate the moving parts of the elliptical equipment to prevent it from squeaking and help to
extend the life of the equipment.
1. Check the floor where the elliptical equipment sits to confirm a level and unobstructed floor. An uneven
floor could create unnecessary stress on the moving parts of the elliptical equipment, which might lead to
squeaks and faster machinery wear and tear.
2. Spray an multi-purpose or silicon-based lubricant onto the bolts that connect the handlebars to the lower
arms. The lower arms support the footpads or pedals on the elliptical equipment.
3. Spray lubricant onto the bolts connecting the foot bars to the crank and the bolts connecting the crank to
the mainframe.
Storage
Store the elliptical equipment trainer in a clean and dry environment away from children and pets.

MAINTENANCE

26